Dbx DriveRack 220i User Manual download pdf (Page 43)

Hardware

1. Connect the outputs of the mixer to the inputs of the DriveRack.

2. Connect the outputs of the DriveRack to the inputs of the amplifier.

3. Making sure that all outputs are muted, apply power to the mixer and amplifiers.

Software

1. Select Program 1 - Stereo & AFS.

2. Load the program by pressing the Program Up and Down buttons on the front panel, or from

the DriveWare GUI.

3. Adjust the individual parameters for the system by selecting the Processing Modules from the

DriveWare GUI.

5.2 - Stereo/Dual Mono System Processing

Application Guide

SECTION 5

220i

DriveRack

User Manual

Provides:

Feedback Suppression

Bandpass Filtering

Limiting

Delay

Compression

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 56 57

No comments

Dbx DriveRack 220i User Manual Page 43