Dbx DriveRack 220i User Manual download pdf (Page 26)

Detailed Parameters

Section 3

220i

DriveRack

User Manual

The Ducker provides a method for attenuating the signal in one channel when a signal is pre-

sent in the other channel.

Ducker On/Off

Turns the Ducker on or off.

Threshold -40 to +20dBu

Threshold is the level from signal path A at which the Ducker will begin attenuating the signal

passing through the Ducker (signal path B).

Amount -0 to 6dB

This parameter sets the amount sets the amount of attenuation.

Attack 0.1 m Sec to 200 m Sec

Attack is how quickly the signal is attenuated in the second channel when a signal is present

in the first channel.

Hold 0 to 500 m Sec

Hold time is the length of time after the signal in the first channel goes below the threshold that

the attenuation is applied to the signal in the second channel.

Release 360 dB / Sec to 5 dB / Sec

Release is how quickly the attenuated signal returns to its nominal level.

The 220i also offers a dedicated compression module. The Compressor is a full bandwidth

Stereo Compressor inserted prior to the Crossover. The Compressor is the perfect tool for tight-

ening uneven signal sources such as vocals and guitars. The parameters for the Compressor are

as follows.

3.7 - Compressor

3.6 - Ducker

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 56 57

No comments

Dbx DriveRack 220i User Manual Page 26