Dbx DriveRack 220i User Manual download pdf (Page 30)

Detailed Parameters

DriveRack

User Manual

Section 3

220i

Gain -36 to 6 dB

Sets the level of the selected notch filter. Set to +6dB to help find unwanted feedback, then set

to -3dB to -36dB to remove.

Q 16 to 128

Selects the Q of the selected notch filter.

This adjusts the mix and output levels of the 220i. If there is a Ducker in the signal path this

also provides for bypassing the ducker module to one or both outputs.

Input A Level -Inf to 20dB

Adjusts the level from signal path A.

Input B Level -Inf to 20dB

Adjusts the level from signal path B.

Output 1 Level -Inf to 20dB

Adjusts the output level of Output 1.

Output 2 Level -Inf to 20dB

Adjusts the output level of Output 2.

In addition to the pre-matrix EQ options within the signal path, the 220i also offers a 4-band

parametric EQ after the matrix section. The parameters for the post-matrix EQ are as follows

and are user adjustable.

3.11 - Post-Matrix PEQ

3.10 - Matrix Mixer

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 56 57

No comments

Dbx DriveRack 220i User Manual Page 30