Dbx DriveRack 220i User Manual download pdf (Page 25)

Detailed Parameters

Section 3

220i

DriveRack

User Manual

Low Threshold: -60 to -30dB

The Low Threshold sets a lower limit to the AGC. This prevents the AGC from adding gain to

low level signals or noise.

Attack: 0.20 to 5 Seconds

This adjusts how fast the AGC will increase gain.

Release: 30.0 to 1 dB/Second

This adjusts how fast the AGC will reduce gain.

The 220i offers a dedicated de-Esser module. This De-esser effect is ideal for removing unwant-

ed vocal sibilance.. These parameters are user adjustable on all programs and are as follows:

De-Esser On/Off

Turns the De-Esser on or off.

Freq. 800 Hz to 8.00 kHz

This is the center frequency the De-Esser uses when in Band Pass mode or the corner frequency

used when in High Pass mode.

Amount 0 to 100%

This controls the amount of De-Essing. The amount control is very much like a combination

threshold / ratio control. A higher amount applies more De-Essing to the signal.

Type HP or BP

Selects the type of filter used by the De-Esser.

Width

Sets the Q of the Band Pass Filter.

3.5 - De-Esser

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 56 57

No comments

Dbx DriveRack 220i User Manual Page 25