Dbx DriveRack PA2 User Manual download pdf (Page 34)

• BAND(1-8) FREQUENCY [20 Hz - 20 kHz]

This parameter adjusts the center/cutoff frequency of the selected EQ band.

• BAND(1-8) GAIN [-12 dB - +12 dB]

This parameter adjusts the gain of the selected EQ band.

• BAND(1-8) Q [0.1 - 15.909]

This parameter is only available with BELL type filters and adjusts the width of the selected PEQ filter. Lower Q settings

provide wider filters, affecting a wider range of frequencies when adjusted. Higher Q settings provide narrower filters, which

affect fewer frequencies when adjusted.

• BAND(1-8) SLOPE [3 dB/Octave - 14.295 dB/Octave]

This parameter is only available with LOW SHELF or HIGH SHELF type filters and adjusts the slope rate of the filter

beyond the cutoff frequency. Lower settings yield a more gradual slope. Higher settings produce a steeper slope.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 69 70

No comments

Dbx DriveRack PA2 User Manual Page 34